To Next PageTo Next Page
Need help?Do you have a question about the Migatronic AUTOMIG 223i/273i and is the answer not in the manual?
General| Brand | Migatronic |
|---|---|
| Model | AUTOMIG 223i/273i |
| Category | Welding System |
| Language | English |
Installation, maintenance, and connection requirements for electrical safety.
Protection of eyes and skin from arc radiation and heat emissions.
Health risks associated with welding fumes and gases, ventilation needs.
General guidelines for preparing the machine for use.
Procedures for connecting the machine to the mains supply.
Specific connection details for the AUTOMIG Boost models.
How to connect the shielding gas hose to the machine.
Connecting the welding torch and return lead.
Adjusting current via the welding torch with dialog torch.
How to select the welding material type using the control panel.
How to select the wire diameter for welding.
Adjusting voltage to control the arc length.
Setting the duration for hot start to aid ignition.
Preventing wire sticking after welding.
Error codes and solutions for control software updates.
Error codes and solutions for welding program package updates.
Safety warning for trained personnel performing maintenance.
Details on 24-month warranty, registration, and standard warranty.
Identification of handles and panel covers for the machine.
Service kit for control box and button identification.
Identification of waterproof switches and rosettes.
Identification of Dinse coupling sockets and machine feet.
Identification of trolleys (2/4 wheels) and bottle carriers.
Identification of wheel caps, end hubs, and tool trays.
Diagram showing numbered components on the main unit.
Diagram showing numbered components on the trolley.
Diagrams showing numbered components on side panels.
Identification of control PCB, mains filters, and cable inlets.
Identification of power cables, solenoid valves, and fans.
Identification of wire feed units and transformer modules.
Identification of empty and software-loaded SD cards.
Identification of current sensors and related wire harnesses.
Identification of flat cables and PCB for DUO models.
Diagram showing numbered parts of the wire feed unit.
Identification of the motor and its power line.
Identification of brackets and upper pieces for fasteners.
Identification of wire inlets and gear wheels.
