EasyManua.ls Logo

Migatronic MIG 385 MK III User Manual

Migatronic MIG 385 MK III
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MIG 385/445/545 MK III
Brugsanvisning
Instruction manual
Betriebsanleitung
Manuel d'instruction
Gebruikershandleiding
Manuale d'istruzione
Bruksanvisning
Käyttöohje
Manual de instrucciones
Kezelési útmutató
Valid from 2011 week 20 50115308 L

Table of Contents

Questions and Answers:

Migatronic MIG 385 MK III Specifications

General IconGeneral
BrandMigatronic
ModelMIG 385 MK III
CategoryWelding System
LanguageEnglish

Summary

General Safety Warnings

Electrical Safety Precautions

Ensures safe installation and operation of welding equipment, including proper earthing and cable maintenance.

Protection from Arc Radiation

Protects eyes and skin from arc light and heat emissions using welding helmets and protective clothing.

Health Hazards from Welding Fumes

Warns about health damage from breathing welding smoke and gases, emphasizing ventilation and exhaust systems.

Fire Hazard Precautions

Addresses fire risk from arc sparks, requiring removal of combustibles and use of fire-resistant clothing.

Physical Hazards

Electromagnetic Interference

Methods for Reducing Emissions

Description of Functions

Initial Operation

Mains Connection Guide

Instructs on connecting the machine to a three-phase mains supply, ensuring correct voltage and safety conductor.

Generator Connection Warning

Gas Connection

Earth Cable Assembly

Details fitting the earth cable to the inductance outlet, emphasizing good electrical contact for safety.

Wire Feed Unit Connection (S-Model)

Control Switches (S-Model)

Control Switches (C-Model)

Wire Speed Control

Trigger Mode Selection

Wire Feed Controls

Includes inching button for wire fitting, burn-back, gas post-flow, and soft-start settings.

Welding Voltage Adjustment

Controls for fine and coarse adjustment of welding voltage.

Maintenance Procedures

Wire Feed Unit Maintenance

Regular cleaning and maintenance of wire feed rolls and capillary tubes for optimal performance.

MIG/MAG Welding Torch Cleaning

Power Source Cleaning

Cooling Unit Maintenance

Location of Errors

Machine Overheat Error

Details the origin, consequence, and remedy for machine overheating errors.

Troubleshooting Guide

Wire Feed Issues

Addresses problems like the wire feed stopping due to misalignment, tension, wear, or dirt.

Spatter Problems

Porous Weld Issues

Wire Sticking Issues

Technical Data

Technical Data MIG MK III

Provides detailed technical specifications for MIG 385C, MIG 445C, MIG 385S, MIG 445S, and MIG 545S models.

Related product manuals