TV OPERATION
Turning on and off the TV
1. Turning on
1. Connect the AC input cable. At this time
the TV will enter standby mode.
2.
In standby mode, press the button on remote control to turn on the TV.
2. Turning off
1.
When the temporary turning off is required, please press the button on remote control.
2. When a complete turning off is required, please unplug the power cable from the power socket.
NOTE:
If there is an accident power off, the TV will be in standby mode automatically after re-supply
the power. To ensure the normal use of the TV, the frequent turning on and off is forbidden,
when there is an accident power off, it is recommended to unplug the power cable from the
power socket.
3. Automatic turning off for no TV signal input
The TV will enter standby mode automatically 15 minutes(5 minutes in PC mode)after there is no any
signal (such as the programs are stopped by TV station).
Press INPUT button on the remote control or the TV/AV button on the panel to enter the menu, and then
select the signal sources by pressing ▲/▼ on the remote control. Press OK button to access the
selected mode.
The volume can be adjusted continuously by pressing VOL+/VOL- on the remote control.
Press MUTE button on the remote control to mute the sound.
You can release mute by pressing MUTE or VOL+.
Switching the Signal Source
Adjusting Volume
Mute and Relevant Functions
Channel Selection
Press CH+/CH- on the remote control to increase or decrease the channel nu
mbers. Also, the channel
can be selected by pressing the number buttons.
Basic Function of the TV
Many function settings and adjustments of the TV will begin from the menu choosing. All operation can
be followed
as help bar shows. Press MENU button to display the main menu. Press ◄/► button to
cycle through the main menu. Press OK button enter into sub-menu. Press ▲/▼ button to highlight the
item to be adjusted. Press ◄/► button to set the selected item.
After setting is done, press MENU to go back to the previous menu. Press EXIT to quit the
setting menu.
Buttons on the TV have the same function as corresponding buttons on the remote control. If
your remote control is lost or couldn’t work, you may use the buttons on the TV to select
menus. This manual focuses on operation of the remote control.
Some items in the menus may be hidden depending on modes or signal sources used.
8
To Next Page
Loading...