MikroTik cAP ac User Manual

cAP ac
cAP ac
The cAP ( ) ac is a ceiling mountable wireless access point. It is already configured, you can simply plug in your ISP cable and start RBcAPGi-5acD2nD
using wireless Internet.
Connecting
Remove metal ring see ;cAP ac#Removing mounting ring
Connect POE to the Ethernet port 1, please see the section for instructions on how to connect POE.cAP ac#Powering
Set your computer IP configuration to (DHCP). automatic
The device wireless access point mode is enabled by default.
The device will boot up and Wireless network will be available for connecting.
Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it.
Once connected to the wireless network, open in your web browser to start configuration, user name: admin, since there is https://192.168.88.1
no password by default, you will be logged in automatically.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, to apply country regulation settings, and set up your password on the screen that loads.
Removing mounting ring
The Mounting ring comes installed on the device, in order to access Ethernet ports please remove it by turning it counterclockwise and the ring will be
released.
Powering

MikroTik cAP ac Specifications

General

Internal	No
Placement	Wall
Product type	-
Product color	White
Processor cores	4
Processor model	Qualcomm Atheros IPQ4018
Built-in processor	Yes
Processor frequency	716 MHz
Networking standards	IEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	54 Mbit/s
Ethernet LAN (RJ-45) ports	2
AC input voltage	17 - 57 V
Power source type	AC
Power consumption (typical)	13 W
Package width	145 mm
Package height	30 mm
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN interface type	Gigabit Ethernet
Antenna gain level (max)	2.5 dBi
Flash memory	16 MB
Internal memory	128 MB
Operating system installed	RouterOS
Operating temperature (T-T)	-40 - 50 °C