To remove the upper cover, press both side clips.
Pull cover to the side while holding the body. When assembling please not mark on the top cover or reference.
Opening bottom cover
To open the bottom cover, press clip upwards to release.
Pull cover slightly from the device body.
Lift it, but do not remove completely.
Expansion slots and ports
Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for
connecting to other network devices.
External SMA antenna connectors.
Integrated Wireless module operating at 5 GHz, 802.11a/n/ac protocol.
Mounting
To Next Page
Loading...
