MikroTik QRT 5 User Manual

1.
2.
3.
4.
Front status LED behavior
RouterOS allows configuring each LED's activity the way that the user wishes. It is possible to configure the LEDs to display wireless strength, blink the
LEDs on interface traffic activity, and many other options. For further information please visit https://wiki.mikrotik.com/wiki/Manual:System/LEDS
Default factory configuration for this device:
Solid Blue – The device is powered on.
Solid Green – Connected Ethernet port.
Solid Green – User-defined LED.
Solid Green – The set of five green LEDs, shows the signal strength.
Mounting
The device is designed to be used outdoors and mounted on the mast with all needed cables connecting through the latch of the unit.
When mounting on the mast, please ensure that the cable feed is pointing downwards.
The IP rating scale of this device is IP54. We recommend using Cat5/6 shielded cables.
Warning! This equipment should be installed and operated with a minimum distance of 30 cm between the device and your body. Operation of this
equipment in the residential environment could cause radio interference.
The QRT box contains several parts that need to be assembled. Please follow this process:
Mounting and configuration of this device should be done by a qualified person.

MikroTik QRT 5 Specifications

General

Brand	MikroTik
Model	QRT 5
Category	Wireless Router
Language	English