3.3 Device Installation
UR75 device can be placed on a desktop or mounted to a DIN rail. For DIN rail mounting, use 2 pcs of
M3 × 6 flat head Phillips screws to fix the mount clip to the device, and then hang the device to the
DIN rail. The width of DIN rail is 3.5 cm.
Recommended torque for mounting is 1.0 N·m, and the maximum allowed is 1.2 N·m.
3.4 Protective Grounding Installation
Connect the grounding ring of the cabinet’s grounding wire onto the grounding stud and screw up the
grounding nut.
To Next Page
Loading...