6. Go to Status > Cellular to check the status of the cellular connection. If modem status is ready
and network status shows Connected, the SIM has been dialed up successfully.
Related Topic
Cellular Setting
Cellular Status
5.2 Configure Ethernet Connection
UR75 routers support getting network access via WAN port.
Configuration Steps
1. Go to Network > Interface > Interface page, find the WAN interface and click Edit button.
2. Select the protocol according to your network router mode or network provider types and
configure the corresponding parameters, then save all settings.
DHCP: upper network router will assign an IP address to UR75 WAN port. This is the easiest way
and requires the upper route to enable the DHCP server.
Status Address: assign a static IP address with the same subnet as the LAN subnet of the upper
network router. Besides, it’s necessary to configure at least one DNS server.
PPPoE: type your PPPoE account username and password, this should contact your network
provider.
To Next Page
Loading...