Chapter 4 Access to Web GUI
UR75 provides user-friendly web GUI for configuration and users can access it via LAN port. This
chapter explains how to access to Web GUI of the UR75 router.
Username: admin
Password: password
IP Address: 192.168.1.1
Connect PC to LAN port or USB port of U75 router directly. The following steps are based on Windows
10 operating system for your reference.
1. Go to Control Panel → Network and Internet → Network and Sharing Center, then click Ethernet
(May have different names).
2. Go to Properties → Internet Protocol Version 4(TCP/IPv4), select Obtain an IP address
automatically or Use the following IP address, then assign a static IP manually within the same
subnet of the device.
To Next Page
Loading...