MILL CO1200WIFI3 - Specifications; Before First Use; First Use; Description of Heater

4 millnorway.com
EN
Specifications
Model Thermostat Color Amperage Power (W) WiFi IP-rating
CO1200WIFI3 WiFi White 220-240V~, 50-60Hz 1200 802.11 b/g/n No
CO1200WIFI3BLACK WiFi Black 220-240V~, 50-60Hz 1200 802.11 b/g/n No
CO1500MAXWIFI3 WiFi White 220-240V~, 50-60Hz 1500 802.11 b/g/n IPx4
Maximum transmitting power: ≤20dBm
Frequency range: 24002483.5MHz
Before first use
After unpacking the heater, check to make sure the product was not damaged during
transport. Contact the retailer or importer if you discover any visible damages to the
product. Keep the outer packaging to transport the heater in the future. If you want
to dispose the packaging, make sure it is done properly. Keep plastic bags away from
children.
First use
After turning on the heater for the first time or after an extended period without use,
the heater can produce a burnt odor for a short time. This is normal. Please read all the
instructions carefully before use. Save the instruction manual for future use.
It is also normal for the heater to make "sounds" when it warms up or cools down.
Description of heater
See figure 1 on separate illustration sheet
A
CO1200WIFI3, CO1200WIFI3BLACK
1. Heat emission
2. LED display
3. Thermostat + WiFi button
4. Settings button
5. ON/OFF
6. Legs (aluminum)
B
CO1500MAXWIFI3
1. Heat emission
2. LED display
3. Thermostat + WiFi button +
Settings button
4. ON/OFF
5. Legs (aluminum)
Parts
See figure 2 on separate illustration sheet
• 8 screws (pre-mounted)
• 2 foot brackets
• 2 rails for the feet