MILL Invisible Series - Advanced mode; How to activate advanced mode for daytime setback; How to activate advanced mode for nighttime setback

9
EN
when you are programming the heater (1=Monday), 2 = Tuesday etc.). You are not
programming the heater for various days. This is simply to tell the heater what day it

○ .
+ and - buttons to set 18 as the desirectfempera-
○ .
+ and - buttons to set 8 hours as desired setback
○.

setback temperature is 18 degrees.
* Control light ☾ is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
N.B! If a power cut occurs/you turn off the heater, the programming will be lost and
you will have to do this over again.
Advanced mode
If you want to have different temperature settings each day, you may use advanced mode.

 
How to activate advanced mode for daytime setback:
1. Press and hold ☉, then press + one time.
2. “d1” (day one) will be visible in the display, and you my now choose the temperature
○.
+ and - buttons to set the temperature for day-
○.
+ and - buttons to set the number of hours as
○.
5. “SR” will be visible in the display. Now you have the option to set the time of day

the time your daytime setback normally starts. Meaning, if your daytime setback

Monday, you may use the - button to set “-○.

same procedure to set the desired temperature for Tuesday. Keep repeating the
same procedure for all 7 days.
How to activate advanced mode for nighttime setback:
1. Press and hold ☾, then press + one time.
2. “d1” (day one) will be visible in the display, and you my now choose the temperature
○ .
+ and - buttons to set the temperature for night-
○.