MILL Invisible Series - Day- and night time setback; How to activate daytime setback; How to activate nighttime setback

8 millnorway.com
EN
Set desired temperature for day/night thermostat
 
Press the arrow buttons to set the desired temperature.
Day- and night time setback
When programming the heater for either day- or nighttime setback, the setback period will
be active from the time you register the program. Which means; if you want to start your
daytime setback at 7.30 am, you need to register the program at 7.30am.
You only need to program the heater 1 time for daytime setback and 1 time for nighttime
setback. If you have programmed the heater, the setback programs will be active on all 7
days (or 7 nights).
EXAMPLE:
Let us say you want to program the heater for both daytime- and nighttime setback (nor-
mally the heater is set to 23 degrees). You want the heater to do the following:
1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17 de-
grees

degrees
How to activate daytime setback
 
1. Tuesday 7.30 am you go to the heater and press
☉ on the heater's control panel.
2. "d" will be visible in the display. Use the + and - buttons to set what day it is today
when you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not
programming the heater for the various days. This is simply to tell the heater what

pressing
○.
+ and - buttons to set 17 as the desired tempera-

○ .
+ and - buttons to set 7 hours as desired setback

○.

temperature is 17 degrees.
* Control light ☉ is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
How to activate nighttime setback
 
1. Tuesday 10.00 pm you go to the heater and press ☾on the heater's control panel.
2. "d" will be visible in the display. Use the + and - buttons to set what day it is today