unplugging the power cable or
DC power cord, wait 5 seconds
before connecting the power
cable or DC power cord for
normal operation.
• Use only the DC adapter to
power the monitor.
• If the power cable is damaged,
it must be replaced by the
manufacturer or a qualified
after-sales service to avoid a
hazard.
• Excessive use of the monitor
can cause visual discomfort, it
is best to take shorter breaks
more often on your workstation
than longer breaks and less
often; for example a break of 5-
10
minutes after 50-60 minutes.
Screen continuous use is
probably better than a 15
minute break every two hours.
EN-2
To Next Page
Loading...
