Proceed as follows to adjust the pad parameters:
1.
First, select the desired kit (see
Ä
Chapter 6.1 ‘Functions’ on page 25).
2. Press the button [EDIT] to switch to Edit mode.
ð
The indicator LED of the button lights. Next to ‘VOICETYPE’, the current Voice cate‐
gory for the currently lit Pad button is flashing in the display.
3.
Press [PAGE] to jump to the desired parameter (see following chart).
4. To adjust the respective value turn the rotary control [–] / [+].
5. Use [ENTER] jump to the next parameter and so on.
Parameter, display Meaning Value range
Voicetype Voice category Kick, Snare, Tom, Ride, Crash, HiHat, Perc, Click, ---
Voice Sound assigned to the trigger Rock, Jazz, Indie etc.
Volume Volume 0 … 127
Adjusting trigger parameters
Operating
MPS-500 USB
33
To Next Page
Loading...
