Parameter, display Meaning Value range
Reverb Reverb 0 … 127
Pitch Pitch –24 … +24
Pan Trigger position within the stereo signal (pan‐
orama right / left)
–64 … +63
After you have assigned all the pads with the desired sounds and adjusted the other parame‐
ters, you can save the settings as a user kit in the unit. To do so proceed as follows:
1. Press the button [EXIT].
ð
The confirmation prompt appears on the display: ‘Save Kits to UserKit xx?’.
2. To select the desired memory location turn the rotary control [–] / [+].
3. Press [ENTER] to save the settings.
ð
The display shows ‘Save OK’.
4. To quit editing without storing press again [EXIT].
Saving settings
Operating
e-drum module
34
To Next Page
Loading...
