4. Activate the desired pad using the pad select buttons or by striking it.
ð
The name of the selected pad appears in the display.
5. Adjust the sensitivity of the pad using the rotary control [–] / [+] to the desired value
(range from 0 to 127).
6.
Activate the next pad for sensitivity setting or use [PAGE] to select another desired
setting parameter.
If you step on the hi-hat pedal quickly, the usual chick sound is produced without playing the
pad additionally (closed hi-hat). When you release the pedal, the splash sound is generated
(open hi-hat). Both pressure and opening point can be set via the drum module.
1. Press [SETUP].
2.
Use [PAGE] to select the menu item ‘Advance’.
3. Press [ENTER] to open the Advance menu.
Hi-Hat response characteristic
Operating
MPS-500 USB
37
To Next Page
Loading...
