Miller Edge - User Manual

OPERATION & MAINTENANCE MANUAL FOR
THE
The Miller
®
Edge™ and related equipment is designed to provide portable fall protection for workers
subjected to fall hazards during leading edge construction.
WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ, UNDERSTAND AND
FOLLOW ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR
DEATH. PREGNANT WOMEN AND MINORS MUST NOT USE THIS PRODUCT.
I211 Rev. C
9720101

Summary

I. GENERAL REQUIREMENTS

A. WARNINGS AND LIMITATIONS

Focuses on precautions, hazards, and limitations for safe use of the system.

B. LIMITATIONS

Details system capacity, component compatibility, and installation constraints.

II. INSTALLATION

A. PART IDENTIFICATION

Identifies key components of the Miller Edge system with visual aids.

B. SYSTEM COMPONENT INSTALLATION

Outlines the step-by-step process for assembling system components.

GENERAL OPERATION

IV. TRAINING

V. INSPECTION

VI. SERVICING, CLEANING, AND STORAGE

A. SERVICING

Specifies that servicing must be done by qualified personnel only.

B. CLEANING

Provides instructions for periodic cleaning of the unit.

C. STORAGE

Outlines proper procedures for storing the unit when not in use.

VII. WARNING LABELS

VIII. INSPECTION AND MAINTENANCE LOG

Miller Edge Specifications

General

Brand	Miller
Model	Edge
Category	Security Sensors
Language	English