Installation Qualifi cation Checklist
Use this installation qualification for each vessel and mixer to ensure that the
correct mixer has been installed and all important information has been gathered for
future use.
Installation Qualification
Different applications require different operating parameters on the frequency
converter depending on:
Density of liquid•
Viscosity of liquid•
Temperature of liquid•
Geometry of vessel•
Type of mixing required•
General Information
Vessel number
Vessel type
GMP type
Vessel Manufacturer
Country
Site Location
Millipore Representative
GMP Mixer Information
Serial Number Catalogue Number Notes
Drive unit
Tank plate
Welded fl ange
(if applicable)
Mixing head
Male bearing
NovAseptic GMP Mixer Installation and User Guide 31