INSTALLATION
Installation shall only be performed by qualified personnel
and in accordance with local governing regulations.
This product is susceptible to electrostatic shock.
Follow proper grounding procedures.
DIMENSIONS
Non metallic enclosure does not provide grounding between connections.
Use grounding type bushings and jumpers.
98\03\09
138 mm
(5.4")
sealed enclosure
270 mm
(10.6")
74 mm
(2.9")
254 mm
(10")
integral junction box
(cover removed)
with terminal block and
voltage selection switch
69 mm
(2.7")
mounting hole
6.4 mm (1/4") Ø
5 mm
(0.2")
Conduit entry area. Recommend drilling the enclosure with a hole saw and
the use of suitable cable glands to maintain ingress rating.
INSTALLATION
PL-531 9
To Next Page
Loading...