Electrical Manual
VM16,17,24,25,30 Electronic Orient Spindle
SERVING YOUR METAL CUTTING NEEDS FOR MORE THAN 25 YEARS
Electrical Safety Rules
Read and understand the following list of cautions before attempting to perform service on this
equipment. Failure to observe these rules can result in death or serious injury.
Caution
· Beware of High Voltage present within the machine’s electrical cabinet
· Do not attempt to service electrical components unless you are qualified to work on them
safely
· Only qualified personnel should attempt to make current and voltage readings
· Always turn the main power off before servicing components within the electrical cabinet
· Always keep hands and fingers away from live electrical terminals
· Remove jewelry while servicing the machine to avoid shorting any electrical circuits
· Allow all components to discharge before servicing them, wait at least 15 seconds after
powering off, before servicing
FAILURE TO FOLLOW THESE RULES CAN RESULT IN SERIOUS INJURY OR DEATH
To Next Page
Loading...
