Page 18 XPS 10/15 F Series Transducer PL-551
Applications
Submergence
In applications where flooding is possible, the transducer can be fitted with a
submergence shield*. The shield acts as a bell to create an air pocket in
front of the transducer face. The associated transceiver* interprets this as a
flooding condition, and reacts accordingly.
Note:
Refer to transceiver manual for programming requirements.
* on applicable models
transducer
hazardous seal
(XPS 10 F only)
submergence shield*
(Refer to Milltronics
instruction manual
PL-530 for assembly
details)
air pocket
To Next Page
Loading...
