Chapter 3. Routine Maintenance
PELLERIN MILNOR CORPORATION
Figure 23: Oil Mist System for Drive Chain
Oil Reservoir Air Filter and Regulator
Manual Controls for Maintenance
How to Align the Nozzle How to Examine the Spray Safely
Legend
1. Primary location to add oil
2. Alternative location to add oil
3. Filter
4. Screen
5.
Hold this switch clockwise to put oil on the chains manually.
6. Key switch to let the cylinder controls operate manually.
7. Hold this switch in either direction to turn the cylinders manually in the direction shown.
8.
Nozzle. The automatic oil spray must occur at each transfer.
9. Where to point the oil spray. One point for each nozzle.
10. Air pressure adjustment knob and gauge.
.
47
To Next Page
