Pellerin Milnor Corporation 11
BNCLJO14 / 2020403
BNCLJO14 0000265584 B.11 9/29/20 9:56 AM Released
3.6 Start the wash formula.
BNCLJO14.C02 0000278743 A.10 B.11 B.10 9/11/20 9:58 AM Released
There are two main ways to run wash formulas:
• Run a formula from the machine’s local memory
• Run a formula remotely from the Mildata
®
computer’s programmer application
3.6.1 To Run a Wash Formula Locally
BNCLJO06.T04 0000194243 A.10 B.11 E.6 9/11/20 10:00 AM Released
1. Use and on the Home display to scroll between pages and locate the formula for
your goods type, or use
to search for the wash formula based on its formula number.
2. Touch the button that displays the wash formula name (Fn). The button changes color to show
that the formula is selected.
3. Touch
to run the formula.
The Run display appears and the door to the washer-extractor locks.
3.6.2 To Run a Wash Formula from the Mildata
®
Computer
BNCLJO06.T05 0000194242 A.10 B.11 E.9 9/18/20 5:03 PM Released
NOTE: When you enable your controller to run Mildata
®
formulas, the local formulas
become unavailable.
Figure 7. Remote Formula Window
1. On the Home display, touch .
2. The Remote Formula window (Fig-
ure 7 ) appears. In the Remote For-
mula window:
a. Enter the formula number for your
goods type.
b. Enter the load data. The available
fields correspond to the Mildata
®
configuration decisions.
c. Touch
to run the remote Mil-
data
®
formula on this machine.
The Run display appears and the
door to the washer-extractor locks.
Normal Operation
14
To Next Page
Loading...
Need help?
General
