Pellerin Milnor Corporation 19
� Stop the machine immediately if any of these conditions occur: • abnormal whining
sound during extract • skidding sound as extract ends • clutches remain engaged or re-en-
gage during extract
2.4.2 Careless Use Hazards
BNWHTS04.C05 0000235045 A.4 A.6 A.2 1/2/20 2:19 PM Released
2.4.2.1 Careless Operation Hazards—Vital Information for Operator
Personnel (see also operator hazards throughout manual)
BNWHTS04.C06 0000235044 A.4 A.6 A.3 1/2/20 2:19 PM Released
WARNING: Multiple Hazards — Careless operator actions can kill or injure person-
nel, damage or destroy the machine, damage property, and/or void the
warranty.
� Do not tamper with or disable any safety device or operate the machine with a mal-
functioning safety device. Request authorized service.
� Do not operate a damaged or malfunctioning machine. Request authorized service.
� Do not attempt unauthorized servicing, repairs, or modification.
� Do not use the machine in any manner contrary to the factory instructions.
� Use the machine only for its customary and intended purpose.
� Understand the consequences of operating manually.
2.4.2.2 Careless Servicing Hazards—Vital Information for Service
Personnel (see also service hazards throughout manuals)
BNWHTS04.C07 0000235043 A.4 A.6 A.3 1/2/20 2:19 PM Released
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
� Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
� Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
� Do not service the machine unless qualified and authorized. You must
clearly understand the hazards and how to avoid them.
� Abide by the current OSHA lockout/tagout standard when lockout/tag-
out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.
For All Users
To Next Page
Loading...
Need help?
General
