Miltenyi Biotec MACSQuant 16 - Install the Chill Rack and Universal Reagent Rack

2
INSTALLATION
71
7 Close the front door of the Instrument and ensure that the MACS MiniSampler Plus is completely inserted
and secured.
8 Guide the MACS MiniSampler Plus cable underneath the instrument and connect it to the port labeled
External CAN at the back of the instrument.
2.5.8 Install the Chill Rack and Universal Reagent Rack
1 Install the Universal Reagent Rack onto the MACS MiniSampler Plus into the left recess by snapping the
engagement hook into the undercut.
2 Place a MACS Chill Rack onto the MACS MiniSampler Plus into the right recess, ensuring that the rack bar
code is facing the instrument. If automatic recognition of the tube rack fails, the instrument will display a
screen for manual selection of the tube rack. Before confirming the choice, ensure that the rack is placed
correctly into the recess.