Milwaukee 2730-20 User Manual

M18
TM
FUEL ™ CIRCULAR SAW
SCIE CIRCULAIRE DE M18
TM
FUEL ™
SIERRA CIRCULAR DE M18
TM
FUEL ™
Cat. No.
No de cat.
2730-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.

Milwaukee 2730-20 Specifications

General

Blade Diameter	6-1/2 inches
Voltage	18V
Speed	5, 000 RPM
Bevel Capacity	50 degrees
Max. Cutting Depth at 90 Degrees	2-1/4 inches
Max. Cutting Depth at 45 Degrees	1-5/8 inches
Arbor Size	5/8 inches

Summary

GENERAL POWER TOOL SAFETY WARNINGS

Work Area and Electrical Safety

Keep area clean, avoid explosive atmospheres, use proper electrical connections.

Personal Safety and Tool Handling

Stay alert, use PPE, proper grip, dress code, tool maintenance.

Battery Tool Use and Care

SPECIFIC SAFETY RULES

Cutting Procedures and Blade Safety

Keep hands away from blade, secure workpiece, adjust depth, avoid hidden wiring.

Kickback Causes and Prevention

Sudden reaction to pinched blade, avoid by proper precautions and firm grip.

Lower Guard Functionality

Check lower guard for proper closing and free movement before use.

SPECIFICATIONS

Tool Specifications

ASSEMBLY

Installing and Removing Blades

Steps for safely removing and installing the saw blade.

Selecting and Checking Blades

Guidance on choosing, using sharp, and checking blades for damage.

Adjusting Depth of Cut

Adjusting Bevel Angle

Blade to Shoe Alignment

OPERATION

Kickback Prevention and Response

How to maintain grip, position body, and react to blade binding.

Safe Cutting Practices

General Operation and Safety

Electric Brake Functionality

Troubleshooting Common Issues

Specialized Cutting Techniques

Plunge Cutting Procedure

Overloading and Material Cutting