Milwaukee 2784-20 - User Manual

Cat. No. / No de cat.
2784-20
M18™ FUEL™ DIE GRINDER
MEULE À RECTIFIER LES MATRICES FUEL™ M18™
AMOLADORA RECTA DE M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Summary

GENERAL POWER TOOL SAFETY WARNINGS

WORK AREA SAFETY

ELECTRICAL SAFETY

PERSONAL SAFETY

POWER TOOL USE AND CARE

Best practices for using and maintaining power tools for optimal performance and safety.

BATTERY TOOL USE AND CARE

Proper usage and maintenance guidelines for battery-powered tools.

SERVICE

SPECIFIC SAFETY RULES FOR DIE GRINDERS

Special safety rules for grinding, sanding, wire brushing, polishing, carving, or abrasive cutting-off operations.

KICKBACK AND RELATED WARNINGS

SAFETY WARNINGS SPECIFIC FOR WIRE BRUSHING OPERATIONS

Specific safety advice for wire brushing operations, including bristle hazards and proper usage.

ADDITIONAL SAFETY WARNINGS

SPECIFICATIONS

ASSEMBLY

Battery Installation and Removal

OPERATION

Installing Accessories

Instructions for securely attaching accessories to the tool, ensuring proper fit and tightening.

General Operation Steps

Step-by-step guide on how to operate the die grinder safely, including starting, stopping, and control.

MAINTENANCE

Milwaukee 2784-20 Specifications

General

Type	Angle Grinder
Voltage	18V
No Load RPM	8, 500
Power Source	Cordless
Battery Platform	M18
Arbor Size	5/8" - 11
Speed	8, 500 RPM
Battery Type	Lithium-Ion
Wheel Diameter	4-1/2"
Battery Compatibility	M18
Switch Type	Slide Switch
Length	12.5 inches