EasyManua.ls Logo

Milwaukee 2680-20 - User Manual

Milwaukee 2680-20
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cat. No.
No de cat.
2680-20
M18™ CORDLESS 4-½" CUT-OFF / GRINDER
MEULE À TRONÇONNER DE 115 mm (4½") M18™
AMOLADORA PARA TROCEAR 115 mm (4½") DE M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
Question and Answer IconNeed help?

Do you have a question about the Milwaukee 2680-20 and is the answer not in the manual?

Summary

General Power Tool Safety Warnings

Service

Specific Safety Rules

General safety guidelines and specific warnings for tool operation.

Kickback and Related Warnings

Understand and prevent sudden reactions caused by pinched or snagged rotating accessories.

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Guidelines for using guards, wheels, and flanges safely during grinding and cutting.

Safety Warnings Specific for Sanding Operations

Precautions for using sanding discs, including size and condition.

Safety Warnings Specific for Wire Brushing Operations

Warnings related to wire wheel brushes, including safety equipment and proper use.

Assembly

Installing;Removing Accessories

Installing, Removing and Adjusting the Guard

Step-by-step guide to fitting, removing, and adjusting the tool's guard.

Installing Accessories

Procedures for safely installing wheels, flanges, and other accessories onto the spindle.

Using Grinding Wheels

Using Wire Brushes

Using Sanding Discs

Maintenance

Limited Warranty - USA and Canada

Limited Warranty - Mexico, Central America and Caribbean

Summary

General Power Tool Safety Warnings

Service

Specific Safety Rules

General safety guidelines and specific warnings for tool operation.

Kickback and Related Warnings

Understand and prevent sudden reactions caused by pinched or snagged rotating accessories.

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Guidelines for using guards, wheels, and flanges safely during grinding and cutting.

Safety Warnings Specific for Sanding Operations

Precautions for using sanding discs, including size and condition.

Safety Warnings Specific for Wire Brushing Operations

Warnings related to wire wheel brushes, including safety equipment and proper use.

Assembly

Installing;Removing Accessories

Installing, Removing and Adjusting the Guard

Step-by-step guide to fitting, removing, and adjusting the tool's guard.

Installing Accessories

Procedures for safely installing wheels, flanges, and other accessories onto the spindle.

Using Grinding Wheels

Using Wire Brushes

Using Sanding Discs

Maintenance

Limited Warranty - USA and Canada

Limited Warranty - Mexico, Central America and Caribbean

Milwaukee 2680-20 Specifications

General IconGeneral
Voltage18V
Wheel Diameter4-1/2"
No Load Speed10, 000 RPM
Spindle Thread5/8"-11
Tool-Free GuardYes
Battery TypeLithium-Ion
Switch TypeSlide

Related product manuals