To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 6088-30 and is the answer not in the manual?
Covers safe use of electrical power tools and cords.
Focuses on operator alertness, PPE, and preventing accidental starts.
General safety for grinding, sanding, wire brushing, and cutting.
Explains kickback and how to avoid it.
Details required PPE for various operations.
Covers wheel selection, guards, and operation.
Explains grounding requirements and double insulation.
How to install, adjust, and remove the guard.
Guidance on choosing sanding discs and grinding wheels.
Methods for effective sanding and finishing.
Guidance on choosing the right disc and grit.
Key safety points and how to grind.
Covers safe use of electrical power tools and cords.
Focuses on operator alertness, PPE, and preventing accidental starts.
General safety for grinding, sanding, wire brushing, and cutting.
Explains kickback and how to avoid it.
Details required PPE for various operations.
Covers wheel selection, guards, and operation.
Explains grounding requirements and double insulation.
How to install, adjust, and remove the guard.
Guidance on choosing sanding discs and grinding wheels.
Methods for effective sanding and finishing.
Guidance on choosing the right disc and grit.
Key safety points and how to grind.
General| Type | Angle Grinder |
|---|---|
| Power Source | Corded |
| Spindle Thread | 5/8"-11 |
| Voltage | 120V |
| Spindle Lock | Yes |
| Amperage | 15 A |
| Switch Type | Paddle Switch |
