To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 6140-30 and is the answer not in the manual?
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Kickback is a sudden reaction to a pinched or snagged rotating wheel.
Use recommended guards and wheels. Avoid corners and sharp edges.
Do not use excessively oversized sanding disc paper.
Be aware wire bristles can penetrate skin; use appropriate guard.
Improperly connecting the grounding wire can result in electric shock.
Tools marked "Double Insulated" do not require grounding.
Use outdoor-rated cords and ensure proper wire gauge for length.
Identifies key components of the sander/grinder.
The guard must be used when grinding for operator protection.
Position the side handle for best control and guard protection.
Use wheels rated at or above the tool's RPM and correct for the job.
Ensure wheel does not extend beyond the guard; use proper mounting hardware.
Select correct disc type and grit for the specific sanding task.
Securely attach sanding discs to the backing pad and spindle.
Always wear eye protection; test accessories before use.
Instructions for starting, stopping, and locking the paddle switch.
Hold tool at 5-15° angle for grinding; use edge only for cut-off.
Move tool constantly across surface, adjust pressure on curves.
Addresses deep scratches, circular marks, and metal discoloration.
Keep tool clean, maintain regular inspections, and use proper cleaning agents.
Only use accessories recommended by the manufacturer for safety.
Contact information for technical support and service in the US.
Contact information for technical support and service in Canada.
Details warranty terms for power tools in the USA and Canada.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Kickback is a sudden reaction to a pinched or snagged rotating wheel.
Use recommended guards and wheels. Avoid corners and sharp edges.
Do not use excessively oversized sanding disc paper.
Be aware wire bristles can penetrate skin; use appropriate guard.
Improperly connecting the grounding wire can result in electric shock.
Tools marked "Double Insulated" do not require grounding.
Use outdoor-rated cords and ensure proper wire gauge for length.
Identifies key components of the sander/grinder.
The guard must be used when grinding for operator protection.
Position the side handle for best control and guard protection.
Use wheels rated at or above the tool's RPM and correct for the job.
Ensure wheel does not extend beyond the guard; use proper mounting hardware.
Select correct disc type and grit for the specific sanding task.
Securely attach sanding discs to the backing pad and spindle.
Always wear eye protection; test accessories before use.
Instructions for starting, stopping, and locking the paddle switch.
Hold tool at 5-15° angle for grinding; use edge only for cut-off.
Move tool constantly across surface, adjust pressure on curves.
Addresses deep scratches, circular marks, and metal discoloration.
Keep tool clean, maintain regular inspections, and use proper cleaning agents.
Only use accessories recommended by the manufacturer for safety.
Contact information for technical support and service in the US.
Contact information for technical support and service in Canada.
Details warranty terms for power tools in the USA and Canada.
General