MIMAKI CJV150-107 - Chapter 2: Take-up Device and Torque Limiter; Take-up Device Operation; Torque Limiter Adjustment

Mimaki Europe B.V.
Sign Graphics Products
A wide variety of Print&Cut functions
• Zero Margin Crop Mark*
• When copying data using the crop mark, users can make the margins
between the crop marks to zero. It enables time saving and also
reducing media waste without loosing the cutting accuracy.
40
Conventional crop markZero margin crop mark
4mm - 10mm space
Eliminates unused media
*Possible with FW Ver.1.4 or later
Zero margin crop mark Conventional crop mark
Reference
When Printing and cutting 100 data of 100×100mm
(1) Conventional crop mark, 4 points, 59min.10sec. (about 1.4㎡)
(2) Zero margin crop mark, 42min.42sec. (about1.2㎡)