Mimaki Europe B.V.
Sign Graphics Products
Example of the use of MAPS
For the standard mode of 540x1080,12P,Bi,Hi (6.1m²/h)
When printing in the lowest pass of each resolution with high speed scan, MAPS does not work when the value is set
to 0% or more (plus).
The set value of MAPS above is just examples. The value can be changed according to customer’s situation.
540x1080,12P,Bi,Hi (6.1m²/h)
Set MAPS-14%*
in the print mode of
540x1080,6P,Bi,Hi
Prints in high production mode
without banding
Increases productivity of standard
mode and print without banding
Prints in high quality mode without
decreasing the print speed too much
from standard mode
Productivity: 10m²/h Productivity: 8m²/h Productivity: 5.5m²/h
① ② ③
Set MAPS+30%
in the print mode of
540x1080,12P,Bi,Hi
Set MAPS+50%
in the print mode of
720x1440,16P,Bi,Hi
16
To Next Page
Loading...
