Mimaki Europe B.V.
Sign Graphics Products
• The automatic Media Clamp function contributes to
perfectly printing on every inch of the media
without handling it
• Also printing is done perfectly without the media
peeling after cutting
Position of clamps during printing
During printing all clamps are down.
The clamps can be adjusted in three
levels (low/middle/high), depending on
the thickness of the media.
Position of clamps during cutting
During cutting the clamps on both sides
are down. For wider models (100, 130,
160) a third clamp in the middle is down.
The clamps which are not needed are
automatically lifted.
Automatic
clamp lifting
Automatic Media Clamp function
17
To Next Page
Loading...
