MIMAKI CJV300-160 - Powering On;Off and Media Setup

© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1 P.2R.1.0
1
2
3
4
5
6
7
INSTALLATION GUIDE > Ink Set > Adjustments When Using Sublimation Transfer Ink
Model
CJV300
Issue
2014.09.01
Revised F/W ver.
1.30
Remark
1.0
Rev.
5.1 Adjustments When Using Sublimation Transfer Ink
When using sublimation transfer ink (water ink), perform the following adjustments to avoid media cockling.
Adjustment of the Station Height
 Work procedures
1. Remove the front cover U.
2. Move the head over the platen.
3. Remove the carriage cover.
4. Remove the under cover R.
Front cover U
Carriage cover
Under cover R