13
42
If either of the left screens* is displayed, the FW upgrade is finished. Press [finish] on the FW
updater.
*There are two different displays, ① and ② , depending on the printer setting.
43
Confirm whether the printer FW has been upgraded properly.
Check the printer FW version by the same procedure as Step1. If the FW version between the printer and the FW updater is
the same, the FW has been upgraded properly.
Thank you for your cooperation.
If the printer FW version is lower than the FW updater, retry from Step.5-(1).
To Next Page
Loading...
