MIMAKI CJV300 Series - Firmware Update: Final Printer Operations; Power On Printer and Start Upgrade

12
36
Press ①[END/POWER] key on the printer to turn on
the power.
37
Click [Next] on the FW updater.
Go to Step.5-(40)
● When you selected the "B" pattern.
38
Press ① [ENTER] key on the printer.
39
Click [Next] on the FW updater.
The FW version upgrade is started.
● After carrying out the "A" or "B" pattern.
40
By following the instructions on the screen, set a
media ① on the printer and press ② [ ＜ ] key on
the printer. Press ③ [FUNC3] key and set the
printer REMOTE mode.
41
Click [Next] on the FW updater.