MIMAKI JV3-75SPII - Page 147

– 5.43 –
a. [TEMP] : Check of the current temperature of the Preheater and Printheater
and the temperature setting.
1) Select the “TEMP” using the
or key.
Press the
ENTER
key.
2) Display the current temperature of the
Preheater and Printheater and the
temperature setting.
Press the
HEATER
key to return the
procedure 1).
3) Press the
ENTER
key.
Select the heater (Pre/Print) using the
or
key.
Change the temperature using the
or
key.
4) Execute the action using the
or key.
5) Press the
HEATER
key to exit from the
function.
# HEATER TEST
TEMP < ent >
Pre 43
o
C (47)
Print 55
o
C (40)
Pre 47 45
o
C
Print 40 50
o
C
Pre 43
o
C (45)
Print 55
o
C (50)
Current temperature Setting temperature
Current temperature Setting value