Need help?Do you have a question about the MIMAKI CG-130SRIII and is the answer not in the manual?
General| Type | Cutting Plotter |
|---|---|
| Blade Type | Standard Blade |
| Repeatability | ±0.1 mm |
| Weight | 46 kg (101.4 lbs) |
| Max Media Width | 1370 mm |
| Max Cutting Speed | 1000 mm/s |
| Interface | USB2.0, Ethernet |
| Media Types | Vinyl, Reflective Film, etc. |
| Power Supply | AC 100-240 V |
| Operating Temperature | 15-35°C |
| Operating Humidity | 35 to 75 % RH (Non-condensing) |
High-accuracy sensor for automatic mark detection and compensation.
Explains the meaning of safety symbols used throughout the manual.
Warnings about power cable safety and operating environment conditions.
Precautions for movable parts, cutters, power connection, and sheet handling.
Step-by-step guide for installing cutters and ballpoint pens.
How to configure cutting speed, pressure, and other parameters.
Loading media and configuring sheet detection for various types.
Performing test cuts and starting the main cutting process.
Adjusting for length differences caused by media thickness.
Performing repeated cuts and using registration marks for precision.
Table of phenomena, causes, and remedies for common problems.
Lists error codes, their causes, and recommended solutions.
To Next Page
