MIMAKI CG-130SRIII - Setting the FEED SPEED

3-58
Setting the FEED SPEED
In the case of using especially heavy roll sheet, the machine burden is reduced by slowing down the feed
speed.
1
Press the key in LOCAL mode.
2
Press the jog key or to select [SET UP].
3
Press the key.
4
Press the jog key or to select [FEED
OPTION] .
5
Press the key.
6
Press the jog key or to select [FEED
SPEED].
7
Press the key.
8
Press the jog key or to select the feed
speed value.
• Setting value : 0 to 30cm/s
9
Press the key.
10
Press the key several times to end the setting.
FUNCTION
ENTER/HOLD
ENTER/HOLD
ENTER/HOLD
ENTER/HOLD
END