Need help?Do you have a question about the MIMAKI CG-60AR and is the answer not in the manual?
General| Type | Cutting Plotter |
|---|---|
| Cutting Speed (Half Cut) | 300 mm/s |
| Repeatability | ±0.1 mm |
| Interface | USB 2.0 |
| Operating Temperature | 5 - 35 °C |
| Weight | 19 kg (41.9 lb) |
| Max Cutting Speed | 1000 mm/s |
| Max Media Thickness | 0.25 mm |
| Cutting Force Range | 30 - 500 gf |
| Compatible Media | Vinyl, paper, film, etc. |
| Power Supply | AC 100-240 V |
| Operating Humidity | 35 - 80 % |
Details the necessary space for the cutting plotter installation, including dimensions.
Explains the meaning and location of warning labels on the machine.
Covers assembly, software installation, and firmware updates.
Identifies and describes the key components and parts of the machine.
Instructions for connecting the machine to a host computer via USB, LAN, or RS-232C.
Procedure for connecting the power cable to the machine.
Steps for safely powering the machine on and off.
Explains the basic system setup for cutting operations.
Outlines the general steps involved in the cutting process.
Instructions for loading various types of sheets (leaf and roll).
Guidance on installing cutters, pens, and creasing tools.
Procedures for choosing and configuring speed, pressure, and offset.
Steps for performing test cuts to verify settings.
Instructions on setting the origin and starting the cutting process.
Operations for managing cutting jobs during execution.
Method for manually cutting and separating sheets.
Overview of the workflow for cutting using register marks.
Guidelines for creating effective register marks.
Configuration options for the register mark detection system.
Procedures for detecting register marks automatically or semi-automatically.
Steps for performing cuts using the ID Cut function.
Details on using jog mode for origin setting and corrections.
How to set the cutting area and perform digitizing operations.
Steps for applying length correction to improve cutting accuracy.
Instructions for cutting multiple identical copies of data.
How to reduce non-printing areas and expand the cutting area.
Setting the rotation function to match application software.
Using divided cutting in width (Y) and feed (X) directions.
How to reorder data for optimal cutting sequence.
Configuring and using the remote control function.
Covers sheet feed, pause, feed settings, and network configuration.
Details on machine functions like test cuts, data clearing, and user management.
Configuration settings for mark detection, commands, cutting mode, and origin.
Important safety guidelines and precautions before performing maintenance.
Overview of routine maintenance tasks and their timing.
Step-by-step guides for cleaning machine parts.
Instructions for replacing cutters, pinch rollers, and pen line rubber.
Information on attaching and using sheet tables and cutting sheets.
Procedure for performing cuts using the cutting sheet.
Guides for resolving common operational problems and symptoms.
Procedures for checking sensor responsiveness and correcting LED pointer position.
Using sample cuts to diagnose and troubleshoot cutting issues.
Explanation of error codes and display messages with corrective actions.
Technical specifications for the CG-AR series cutting plotters.
Factors affecting the repetition accuracy of the machine.
A sheet for recording sheet names and correction values.
To Next Page
