MIMAKI CG-60AR - Process for Cutting with Register Marks

Chapter 3 Cutting Data with Register Marks
78
3.1 Process for Cutting Data with Register
Marks
Printing images to be used as labels with "register marks" allows sheets to be cut by detecting the register
mark positions.
1.
Create data with register marks.
"Creating Register Marks"(P. 80)
This machine can detect the following two types of register marks:
Mark shape
Type 1 Type 2
2.
Print printing data with register marks.
3.
Prepare for cutting.
"Cutting Process"(P. 42) (Steps 1 to 8)
4.
Set register mark detection conditions.
"Setting Register Mark Detection Conditions"(P. 85)
5.
Detect register marks.
"Detect register marks."(P. 89)