MIMAKI CG-60AR - Setting Sheet Information

Chapter 9 Appendix
177
9.3 Setting Sheet
When changing the sheet to be cut (or printed), it may be necessary to perform distance correction,
depending on the sheet thickness. "Length Correction [DIST.COMP.]"(P. 103)
This setting sheet is useful for writing down the sheet to be replaced and correction value in such cases.
Sheet Name:
A = B =
A =
Sheet Name:
B =
Sheet Name:
A = B =
Sheet Name:
A = B =
Sheet Name:
A = B =
Sheet Name:
A = B =
Sheet Name:
A = B =
A =
Sheet Name:
B =
A =
Sheet Name:
B =
Sheet Name:
A = B =
Sheet Name:
A = B =
Sheet Name:
A = B =
Sheet Name:
A = B =
Sheet Name:
A = B =
9