MIMAKI CF2 Series - User Manual

CF2-0912, 1215, 1218
RC model
RT model
OPERATION MANUAL
• Prior to using this device, be sure to read this Operation manual and become fully
familiar with its operation method and usage cautions.
• While the plotter is operating (while it is moving or its blades are vibrating), abso-
lutely never bring any part of your body (face, hands), clothes, or other objects near
the flat bed (cutting panel), as serious injury may result.
Particularly when lifting the head and operating the device without a work piece in
order to check data, one's hand can enter under the head safety cover. As this may
cause serious injury, proceed with great care.
• The head units (A, B, C) move at high speed. When checking work results or adjust-
ing work slippage or floating, be sure to stop the device and perform these actions in
either the local mode or with the power switched off.
• When attaching tools (reciprocal cutter, etc.), be sure to power off the device before-
hand.
Attempting to change tools while the power is on presents the risk of unexpected
injuries due to erroneous panel operation, etc.
RECIPROCAL FLAT BED CUTTING PLOTTER
CF2 / DC Series
MIMAKI ENGINEERING CO., LTD.
URL: http://mimaki.com/
D201402-16

Summary

FOR SAFE OPERATION

WARNING

Critical safety warnings and precautions for device usage.

CAUTION

Important safety precautions for operation and handling.

CAUTION

CHAPTER 1 SET-UP

INSTALLATION SITE

Guidelines for device placement and environment.

CONFIGURATION AND FUNCTION

CONNECTING THE CABLES

Instructions for connecting power and data cables.

TURNING THE POWER ON;OFF

EMERGENCY STOP

How to stop the device in an emergency situation.

CHAPTER 2 BASIC OPERATION

BASIC OPERATION ON THE LOCAL MENU

FIXING A WORK

ADJUSTING THE BLADE AND THE PEN

Procedures for adjusting cutting tools and pens.

SETTING CUTTING CONDITIONS [CONDITION]

CHECKING CUTTING CONDITIONS [TEST CUT]

CHAPTER 3 WHEN ABNORMAL CONDITIONS ARE ENCOUNTERED

IF ANY OF THE BELOW-STATED PHENOMENA TAKES PLACE

Common issues and their solutions.

TOOLS ARE NOT ALIGNED TO EACH OTHER [TOOL SELECT]

TROUBLES FOR WHICH ERROR MESSAGES ARE GIVEN ON THE LCD

Diagnosing and resolving device errors.

CHAPTER 5 REGISTER MARK DETECT FUNCTION

PRECAUTIONS IN PREPARING DATA WITH REGISTER MARK

SETTING OF REGISTER MARK DETECT OPERATION

Configuring the register mark detection system.

MIMAKI CF2 Series Specifications

General

Brand	MIMAKI
Model	CF2 Series
Category	Plotter
Language	English