MIMAKI CF2 Series User Manual

2-6
BASIC OPERATION FLOW CHART
The following is the basic operation flow chart.
Refer to the page to be referred to for detailed explanation of each operation.
Attach a work in position.
Attach tools in position.
Adjust the height of the head.
Select a tool to be used.
Set cutting conditions for the tool.
Set cutting conditions
Set a cutting area.
Set an origin for plotting.
Change the operation mode to the REMOTE mode.
Transmit data.
Fixing the work （ P. 2-9）
Attaching tools （ P. 2-14）
Adjusting the height of the head （ P. 2-19）
Selecting a tool （ P. 2-22）
Check the cutting conditions for the tool
（ P. 2-22）
Check the cutting conditions （ P. 2-29）
Setting a cutting area （ P. 2-36）
Setting an origin （ P. 2-39）
Basic operation on the LOCAL menu
（ P. 2-2）

MIMAKI CF2 Series Specifications

General

Brand	MIMAKI
Model	CF2 Series
Category	Plotter
Language	English