MIMAKI CF2 Series - Chapter2 Basic Operation

CHAPTER 2
BASIC OPERATION
In Chapter 2, normal operation of the device such as the attaching of tools or works.
Table of Contents
BASIC OPERATION ON THE LOCAL MENU .......................................................................................................2-2
BASIC OPERATION FLOW CHART ..........................................................................................................................2-6
MOVING THE HEAD .......................................................................................................................................................2-7
FIXING A WORK ...............................................................................................................................................................2-9
ADJUSTING THE BLADE AND THE PEN .......................................................................................................... 2-11
ATTACHING THE TOOLS .......................................................................................................................................... 2-14
ADJUSTING THE HEIGHT OF THE HEAD ....................................................................................................... 2-19
ATTACHING THE WORK HOLDER ......................................................................................................................2-21
SELECTING A TOOL [TOOL SELECT] ................................................................................................................2-22
SETTING CUTTING CONDITIONS [CONDITION] ........................................................................................2-23
CHECKING CUTTING CONDITIONS [TEST CUT] ........................................................................................2-29
SETTING THE CUTTING AREA [CUT AREA] ..................................................................................................2-36
SETTING THE ORIGIN (ORIGIN FOR PLOTTING) .......................................................................................2-39
INTERRUPTION OF PROCESSING (PLOTTING, CUTTING OR CREASING) ...................................2-40