1-27
AUTO-OFF FEATURE OF THE VACUUM
The validity of the Auto-OFF feature can be set up.
When the automatic head retraction function is set to 1s or 3s, the vacuum will turn off automatically after the head
retracts.
When the automatic head retraction function is off, the vacuum will not turn off automatically.
While operating copy function, number cut function, or completing continuous register mark copy, will turn the vac-
uum off automatically, regardless of the automatic head retraction function.
Auto-OFF/Panel-OFF[MODE SET]>[VACUUM]
1. Press the key several times until the LCD indicates page 3
of the LOCAL MENU.
2. Select the [MODE SET].
3. Select [VACUUM].
Auto OFF, Panel OFF
4. Register the setting.
Press the key to register the setting.
When not registering, Press the key.
• To use the vaccum function,Blower (available as opttion) is needed.
［LOCAL］ １ ／ ４
TOOL SELECT ――― ＞
CONDITION ――― ＞
TEST CUT ――― ＞
［ LOCAL］ ３ ／ ４
INTERFACE ――― ＞
MODE SET ――― ＞
SELF TEST ――― ＞
＜MODE SET＞ １／６
Z STROKE *7ｍｍ ＞
MULTI–PASS ――― ＞
VACUUM *AutoOFF>
＜MODE SET＞ １／６
Z STROKE *7ｍｍ ＞
MULTI–PASS ――― ＞
VACUUM *AutoOFF>
To Next Page
Loading...
Need help?
General
