MIMAKI CF2 Series - Color of Register Mark

PRECAUTIONS IN PREPARING DATA WITH REGISTER MARK
5-9
Color of Register mark
Black or white is recommended for the register mark color.
Other corlors can be detected. However make sure to not use the same color as media(work).
It is recommended to confirm ahead, either register mark is detectable.
The register mark will not be deteced correctly if there is a strong glossy, pattern (hair line) on the work, or depending
on the media(work) color.
Register mark Blurred
If the mark is blurred, a wrong mark origin can be detected, thus resulting in edviated cutting.
Blackmark Whitemark
Media:Red
Mark:Blue
Recommend
Media:Red
Mark:Red