Need help?Do you have a question about the MIMAKI CG-60SRIII and is the answer not in the manual?
General| Type | Cutting Plotter |
|---|---|
| Repeatability | ±0.1 mm |
| Blade Type | Standard Blade |
| Max Media Thickness | 0.25 mm |
| Cutting Force | 500 gf |
| Software Resolution | 0.01 mm |
| Interface | USB2.0 |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Operating Temperature | 5 - 35 °C |
| Operating Humidity | 35 to 80 % |
Explains safety symbols and their meanings for operation and damage prevention.
Warning against disassembly or remodeling due to electric shock or breakdown risk.
Instructions for safe handling and care of the power cable.
Precautions against using the plotter in damp places to prevent hazards.
Steps to take if smoke or strange smell occurs; do not repair yourself.
Explains the purpose and importance of safety labels on the machine.
Warnings about moving parts and safe handling of cutters.
Instructions on connecting the ground wire and power cable correctly.
Guidance on securing suitable installation space for the plotter.
Instructions for connecting USB, LAN, and power cables for operation.
Procedures for installing cutters and pens for operation.
How to create and use registration marks for precise cutting.
How to cut data larger than sheet width or long data by dividing it.
Lists common error messages, their causes, remedies, and status messages with actions.
To Next Page
