Carriage
The carriage carries the pen and
moves it up and down. ( P.1-6)
Power switch
The switch turns on/off the
power.
( P.2-8, 2-26)
Grit roller
The grit rollers operate in
combination with the pinch
rollers to feed the sheet.
(P.1-7)
Platen
The sheet of media moves along
the platen.
Operation panel
This panel operates this
machine and sets functions.
(P.1-5)
Clamp lever
Pushing a lever down lowers a
pinch roller and retains the
sheet.
Pinch roller
The pinch rollers feed out the
sheet while pressing it against
the grit rollers. ( P.1-7)
Pen line
The plotter performs
cutting or plotting
on the pen line.
Pinch roller guide mark
This marks indicate the
locations at which the pinch
roller are to be set.
Roll stoppper
(CG-100/130SRIII)
When setting a sheet,
prevents the roll sheet from
rotating.
( P.2-20)
Cut slot
The slot is used for cutting the
sheet manually.
( P.2-25)
Sheet sensor
This sensor detects the presence of the
sheet and sheet length. ( P.1-8)
To Next Page
Loading...
