x
For safe operation
CAUTION
Use the following electrical specifications Do not dress baggy suits and accessories
• Be sure to connect the power cable
to a power outlet with the following
electrical specifications.
Be sure to perform tap change
depending on the voltage.
Main unit:AC100 to 240 V±10%
50/60 Hz
300W or higher
• Do not work with dressing baggy
suits and any accessories, and also
tie any long hairs.
Do not restart the power until 30 seconds
after turn off
Do not move your face in front of cut panel
• If the device is restarted, do not turn
on the power until 30 seconds after
turning off. The device may be
caused faulty function.
• Do not move your face and hands in
front of the cut panel while the unit
is working.
The device can wind and touch
your hairs or hands.
Do not put any matters on the cable The device is moved by our service engineer
only
• Do not bend the power cable and
the communication cable, and do
not placed any matters. These
cables may be broken and heated,
the power cable can cause fire or
electric shocks.
• The device is too sensitive equip-
ment, so in case if you require
movement of the unit, please con-
tact to our service engineer.
To Next Page
Loading...
Need help?
General
